Triggers That Feel
Better
Smoother
Faster
Precision Triggers Built Right Here in the USA
Select options to see price
Kit Includes:
• RAMM Tactical Leverage Trigger (Black)
• Proprietary take down lever (Black)
• RAMM Tactical slide end cap (Black)
• Proprietary Safety Lever Pin (Patent Pending)
• Proprietary Sear
• Sig Sauer long trigger pin (Must Use)
• Sear spring, trigger return spring, safety plunger spring
• 4.0lb avg. trigger pull weight
• 3.5lb and 4.5lb spring kits sold separately
• Pre/Post travel adjustment .9mm hex key
• Use your factory thumb safety lever
• Added striker sleeve for thumb safety models
• Extra Blue Loctite
Caution: This product should be installed by a competent gunsmith.
No liability is expressed or implied for damage or injury which may result from installation or use of this product.
————>Install Tip Saves Time and Money!
————>Click here to add installation services
TECHNICAL SPECS
Our Sig Sauer® P365 for all variants includes California models and magazine safety State compatibility replacement triggers are engineered to reduce the overall trigger pull weight, pre and post travel and reset, just as the many other aftermarket triggers on the market today, yet no assembling and disassembling multiple times for tuning. Fits state compliant magazine safeties. What you’ll also get from Ramm Tactical, is a Sig Sauer® replacement trigger that produces the advantage of keeping the factory striker spring that comes with the factory Sig Sauer® in the first place. If you reduce the pull weight by simply changing to lighter striker springs, you may end up with an unreliable and possibly unstable firearm. Our trigger kit design takes out maximum pre travel without compromising the trigger safety plunger and drop safeties designed in the factory Sig P365 pistol. The trigger comes equipped with a pre and post travel set screw so you may dial in the correct amount of pre/post travel necessary to achieve full travel for full ignition with desired rearward travel. This makes the reset as short as possible while keeping your P365 reliable and safe.
The beauty of innovation is trigger geometry while maintaining all the factory springs for perfect functionality. Factory Sig Sauer® engineers have made the reliability and repeatability of Sig Sauer® firearms consistently safe and reliable by using designed springs that allow full ignition every pull of the trigger and quick positive resets to make for a workhorse firearm. We have taken the factory design and by utilizing a better leveraged force, reduced the trigger pull weight and length of pull. You will experience the reliability and repeatability of a factory Sig Sauer® but with less trigger pull weight and less trigger travel than the factory Sig Sauer® P365 trigger. Plus, no light primer strikes, no long, mushy trigger pulls and no sloppy, sluggish resets.
SPECS:
• Our triggers are made to fit Sig factory specs!
• Compatible with all P365 models (Includes California)
• Choose model based on the FCU
• Trigger is 4140 heat treated steel
• Not Compatible with MCarbo Titanium Striker!
Kit Includes:
• RAMM Tactical Leverage Trigger
• Proprietary take down lever
• RAMM Tactical slide end cap
• Proprietary Safety Lever Pin (Patent Pending)
• Proprietary Sear
• Sig Sauer long trigger pin
• Sear spring, trigger return spring, safety plunger spring
• 4.0 lb. trigger pull weight avg.
• Use your factory thumb safety lever
• Added striker sleeve for thumb safety models
• Pre/Post travel adjustment .9mm hex key
• Extra Blue Loctite
Note: Our parts are made to Sig Sauer specs and there are no guarantee for fit of every aftermarket component out there. Most aftermarket parts that are made to Sig specs are most likely going to fit our parts, but there is no guarantee promised or implied that out kit parts will fit all aftermarket components.
Warning: This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product.
DISCLAIMER: “Sig Sauer®” is a federally registered trademark of Sig Sauer, Inc., and is one of many trademarks owned by Sig Sauer Inc. Neither “The Trigger Guy”, dba RAMM Tactical, nor this site is affiliated in any manner with, or otherwise endorsed by Sig Sauer, Inc. The use of “Sig Sauer” on this page is merely to advertise the sale of Sig Sauer pistols, parts, or components.
WARNING: This product can expose you to chemicals including lead, which is known in the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warningsca.gov
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 5 × 4 × 3 in |
| Ship To California* | Yes +$10, No |
| FCU (G or H) Stamped (See 1 min. video below)* | Yes, No |
| Are you using a manual thumb safety* | Yes, No |
Because there are critical dimensions when adding our kit to a manual thumb safety model. Sometimes, not always, the striker sleeve gets distorted due to removing the striker from time to time. Whether it be for cleaning or replacing parts, the plastic sleeve can become distorted and this may present a problem with the position of the striker lug or it may cause the fitment to be looser than a factory new sleeve.
No, for the very reason in the above question, we want to have the information documented in case of a loose fit in the sleeve. This helps us diagnose issues if you experience incorrect safety functions when adding our kit to a manual safety version P365.
4.0 lbs and you may add 3.5lb or 4.5lb spring kits separately.
It is drop-in with minor trigger adjustments, but professional installation by a certified
gunsmith is strongly recommended. RAMM Tactical offers in-house installation — add it to
your cart
No. Designed for the factory Sig Sauer striker only.
No. Although the kit is compatible with factory manual safeties, it does not come with one.
You can purchase the manual safety lever separately.
